Material differences:

　　From the material point of view, the material thickness of this kind of in** x inflatable boat on Taobao is generally about 0.4mm PVC or plastic material. The material thickness is thin, and it is designed as a single chamber. That is to say, there are only one chamber or two chambers. Professional rubber boats are made of professional inflatable boats: imported PVC material, 0.9mm thick, with 1100D strength fiber mesh in the material, which is equivalent. A layer of strength fiber mesh between two layers of PVC material can increase tension and impact resistance, and this kind of PVC material is added with anti-ultraviolet material, which can not deform or crack and leak under long-term sunshine, and this kind of PVC material has replaced the traditional pure rubber material and become the mainstream material of today's inflatable boat.

　　Professional PVC rubber boats all adopt multi-chamber design, that is to say, a boat has 3-6 air-filled holes, which can still maintain the buoyancy when one of the air chambers leaks, so the multi-chamber design will make the crew safer.

　　Distinction of components:

　　Compared with in** x rubber boat, the professional PVC rubber boat has stronger oars and thicker aluminium alloy material, which can ensure long-term use without breaking or cracking. Common parts, such as oar lock, are made of plastic and metal buttons, which can ensure that they are not damaged by excessive force in the process of frequent sliding.

　　Weight difference:

　　In fact, to judge whether a boat is good or bad, just ask the weight of the seller's boat. The weight of a professional rubber boat about 2.5 meters must exceed 30 kilograms. If the weight of an inflatable boat in ** x should be a little more than 10 kilograms or lower, and above the price, the price of a professional PVC rubber boat should be more than 2.5 meters. If the price is too low, you should pay attention to whether you have any questions. That's the problem.

　　Suspension power difference:

　　Most in** x inflatable boats do not have suspended power tail plates. If you need to add electric or fuel outboard engines, you need to buy stainless steel tube trailer tail plates at a price of 140-170. At this time, please pay attention to the weight of your machine, which means that you can only choose a small machine with 2-3HP horsepower. For 3-4 people in** x inflatable boats with a length of about 3 meters, you can only choose a small machine with 2-3HP horsepower. This kind of power is obviously not enough, but if you need to hang a bigger power outboard engine, such as the 6HP outboard engine, the weight of this power machine is generally around 20KG. The stainless steel bracket on the inflatable INX boat can not bear such a large weight, which is manifested by the bending of the stern, and the engine will sink into the water.

　　Professional PVC rubber boat tail has a professional Trailer tail plate, the tail plate thickness is generally 30-45 mm, such thickness is enough to withstand 23-50 kg of the weight of the ship's engine, that is to say, you will not restrict the power size of the ship's engine because of the ship's reasons.

　　Price difference:

　　Generally, the price of in** X Series inflatable boats is about several hundred yuan. The price of professional PVC net-clamped motor boat cloth rubber boats is generally between 2000 and 5000 yuan. There is still a big difference, but if the average cost is different, because the latter can be used for a long time without damage, and the former is mostly 3-5 times of life.

　　Ways of use:

　　Most of the inflatable boats with hundreds of yuan are toys used in swimming pools. This kind of boat absolutely cannot enter natural waters, because the hull and seams can not withstand the impact of excessive water spray or sea waves from external forces due to the shortcomings of hot melting technology, which can easily cause pressure loss and material tearing. This is a very dangerous thing in rivers, lakes and seas.